Graphic Whizard PT 331S Semi-Automatic Creaser and Perforator

This hand-fed creaser can produce up to 2,800* sheets per hour, program up to 30 jobs with up to 6 creases per sheet.  Cross perforate when not creasing, optional rotary perforating is available.

 

The PT 331S is an entry level tabletop manual feed creaser that produces the same professional results of more expensive creasers at a fraction of the cost. This Semi-Automatic creaser is also capable of perforating both directions in a single pass. Equipped with interchangeable creasing/perfing dies, the PT 331S can quickly switch over from perfing to creasing while preventing digital toner cracking. The 331S can be placed on an optional stand or used as a tabletop machine with removable trays to minimize the footprint.

 

Electrical	110-130V, 50/60Hz, 15A
Speed	2,800 sheets per hour
Maximum Sheet Size	13″ wide x 25.6″ long (33.02cm x 65.02cm)
Minimum Sheet Size	1.97″ wide x 3.94″ long (5cm x 10.01cm)
Stock Weight	100-350 gsm
Tabletop/Floor	Tabletop
Max Number of Creasing Positions	6
Program Memory	30
Feeder	Manual
Cross Perforating	Yes
Linear Perforating	Yes
Strike Perforating	No
Micro Perforating	No
Auto Sheet Measure	No
Controls	Touch Pad
Warranty	1 Year
Machine Stand	Optional
Rotary Perf Options	12 TPI and 24 TPI (up to 4 rotary perf assemblies can be fitted)

* based on 8.5” x 11” run landscape, 1 crease (speed is also operator dependent)

NOTE: Machine performance will vary based on stock weight, type, and specifications of the job being performed.