Morgana DigiFold Pro

DISCONTINUED See the new DigiFold Pro XL

Crease & Fold up to 6,000 Sheets per Hour!

This speed is maintained irrespective of the number creases being applied to the sheet. 9 sheets each with 9 creases can now be produced in less than 9 seconds!

We challenge anyone else to do it more quickly with the accuracy and repeatable quality of the DigiFold Pro. The maximum sheet size is 27.5" x 15" (34.5"mm x 15" with optional extension table) allowing a wider range of jobs to be tackled. Perforation is also standard on the DigiFold Pro with up to 5 perforation wheels being used across the sheet.

The DigiFold Pro is an automatic creasing / folding machine designed specifically for the professional digital or litho printer who has a need to crease and fold digitally printed, heavy weight or cross grained stock.

Creasing versus Scoring

Traditional rotary scoring machines use circular blades that are in constant motion as the stock passes through them. This creates a plowing action that actually cuts through the top fibers of the paper or card in order to create a score. Inevitably this weakens the paper and encourages cracking. In contrast, the Morgana DigiFold Pro employs a unique creasing rule and matrix, the DynaCrease, that eliminates tearing and therefore, cracking.

By using this patented technology, the DynaCrease, we have managed to increase the speed to over 6,000 8.5" x 11" sheets an hour. Speed increases when running smaller stocks and is achieved by creasing the sheet without stopping it, yet maintaining an accuracy of +/- 0.003".

Key Product Features

• SmartScreen touch screen operation
• 6,000 sheets per hour
• Takes stock up to 0.015" (approx 150lb cover)
• Alpha-numeric memory
• PosiFeed feed system
• Up to 27.5" x 15" sheet size
• Up to 35.4" x 15" sheet size with optional extension
• Crease & Fold without cracking, scratching or marking
• Perforating is standard

Controlled by the same innovative 7" SmartScreen panel as the rest of the Pro range, the DigiFold Pro is instructed how long the sheet is and which crease/fold to produce. All settings and adjustments are made using the New SmartScreen and as only symbols are used, operation couldn’t be simpler.

An alpha-numeric memory allows an unlimited number of jobs to be stored and named as you choose. This makes job recall much easier as you can use your own job names and numbers for storage.

The DigiFold Pro has the new Morgana PosiFeed feeding system. The drum stops as the vacuum pulls the sheet down before the drum starts to feed. This significant change will enable the feeder to be piled higher and feed the most difficult of stocks.

The DigiFold Pro uses our patented flying knife technology which was developed to prevent the scuffing and marking on digital stocks that are caused by folding using conventional methods. This dispenses entirely with buckle plates and conventional knives, using instead an electronically controlled contoured flying knife around extra large diameter rollers and moving at the same speed as the material passing through the machine. Rather than the solid deflector used in most folders, the DigiFold Pro uses another patented device in the form of a dynamic sheet deflector that only comes in contact with the leading edge of the sheet. This allows single or multiple folds to be performed without risk of scratching or marking.

The DigiFold Pro can be used as an integrated creaser/folder performing both functions in a single pass, as a stand alone creaser when folding is not required or as a perforator when creasing and folding are not required.

The beauty of the DigiFold Pro is its simplicity allowing the user to invest in a machine and to improve their productivity and quality immediately.