12" Feed Opening Allows Feeding 8 1/2" x 11" Documents Widthwise or Lengthwise
Photo cell controlled automatic start and stop. Patented Electronic Capacity Control (ECC): Indication of the used sheet capacity during shredding process. Convenient 12" feed opening for 8 1/2" x 11" lengthwise and widthwise. High quality paper clip proof cutting shafts from special hardened steel. LIFETIME guarantee on the solid cutting shafts under conditions of fair wear and tear. All model variations suitable for shredding the most common CDs/DVDs. Quiet but powerful 640 Watt single phase motor for continuous operation. Sturdy Twin Drive System with fully closed gear box housing. High-quality wooden cabinet, mobile on castors. Convenient, environmentally-friendly shred bin made of impact-resistant plastic with 32 gallon volume for the shreds (can be used with or without plastic bag).
SPS® (Safety Protection System) package: electronically controlled, transparent safety shield in the feed opening; "Easy Switch" control element uses color codes and back-lit symbols to indicate operational status; automatic reverse and power cut-off (avoids paper jams); automatic power cut-off when shred bin is full or when cabinet door is opened; double protection against overheating; ESM® (Energy Saving Mode) after 1 hour of inactivity.
Features
- automatic start and stop controlled by photo cell
- ECC (Electronic Capacity Control) indicator helps prevent paper jams by indicating sheet capacity levels during the shredding process
- wide, 12" feed opening
- high quality, hardened steel cutting shafts take staples, paper clips, credit cards, and CDs
- lifetime warranty on the cutting shafts
- quiet and powerful single phase motor rated for continuous operation
- sturdy "twin drive system" with dust-proof gear box housing
- high quality wooden cabinet mounted on casters
- convenient shred bin
- 32 gallon shred volume (approximate)
Specifications
Feed opening |
12 |
Particle size |
3/16" x 1 1/2" |
Sheet capacity |
22-25* |
Shred speed |
18 ft./min. |
|
Security Level as
defined under the
DIN 32 757 Standard
|
Shred capabilities (non-paper) |
|
Maximum horsepower |
1 |
Motor output |
.64 KW |
Electrical requirements |
115V |
Dimensions (D x W x H) |
18 1/2" x 21" x 36 1/2" |
Shipping weight |
132 lbs. |
*May vary due to variations in paper and power supply |
Optional shred size for the 3104 Note: will not handle CDs/DVDs |
Optional particle size |
3/32" x 5/8" |
Sheet capacity |
14-17* |
Shred capabilities (non-paper) |
|
|
The model 3104 equipped
with this shred size is not
capable of shredding
CDs/DVDs
|
|
|