Previous image
Digicut 185 Automatic Cutter
Next image
Zoom image

Digicut 185 Automatic Cutter

Automatic Clamping and a Digital Display for Precise Cut-Length Adjustments

Cut Up To A 3" Stack of 12" x 18" Paper In One Swift Stroke!

Blade activation bars provide easy control over the electro-mechanical blade and clamp drive. Cuts up to 3" of paper in one swift stroke.  The Digicut 185 cutter will handle all standard sheet sizes;  8.5" x 11" , 8.5" x 14", 11" x 17" and an oversized sheet; 12" x 18".  The oversized 12" X 18" sheet is typically used for a full bleed finish for 11" x 17" or multiple up printing.  If you need to trim the 18" edge, the Digicut 185's 18 5/8" cutting width will get the job done!   Automatic clamping provides consistent clamping pressure with each cut, unlike manual clamping which depends on the operator and can result in different clamping pressures with each cut, affecting the quality.  The automatic clamp control allows the clamp to be moved up or down, independent of the blade.  A useful application of this independent clamping action would be the compression of the spine of booklets.  The spindle-guided back gauge with calibrated crank and digital measurement display provides the operator accurate control for precise cuts.  An optical cut line with bright and durable LEDs allow the operator to see precisely where the cut will occur.  Quality constructed of all steel and designed with built-in safety features.

SCS® (Safety Cutting System) package: hinged, transparent electronically controlled front safety guard; transparent safety cover on rear table; main switch and safety lock with key; electronically controlled, true two-hand operation; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade return from every position; automatic clamp return from every position; disc brake for instant blade stop; blade and cutting stick can be changed without removing covers; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine

Features

  • electric blade and clamp drive
  • Solingen steel blade
  • solid steel blade carrier and adjustable blade guides
  • automatic clamp is guided on both sides to apply even pressure along entire cutting width (can be lowered or raised independently from blade)
  • dual side guides on front and rear tables
  • spindle-guided back gauge with calibrated crank, narrow separations, and plastic gliders
  • digital display for precise back gauge positioning
  • bright, LED optical cutting line
  • all-metal construction
  • stand with storage shelf
  • optional side tables for increased work surface
  • UL and C UL approved

Specifications

Cutting width 18 5/8"
Cutting height 3"
Narrow cut 1"
Table depth 18"
Dimensions (D x W x H) 41 1/2" x 30" (53" with optional side tables) x 51"
Motor 2 hp
Power Supply 115 V, 60 Hz (A 20 amp dedicated line is required)
Shipping weight 556 lbs.  Ships by truck   (shipping weight with side tables: 576 lbs.)

Note: Cutter requies assembly to stand.

request%20quote.jpg

  • Weight
    556.0000 lbs
  • SKU
    DIGICUT185
  • Manufacturer
    DIGICUT

Product questions

No questions yet. Be the first to ask the question!
Related products
Drop items here to shop
Product has been added to your cart