Morgana AutoCut Pro Slitter-Cutter-Creaser

The AutoCut Pro is the latest in the range of Morgana card cutting and creasing devices. Designed for today's busy digital printshops and in-house digital printing centers who have the need for high speed creasing and for the production of a wide range of finished applications including business cards, post cards, brochures and more!

The AutoCut Pro can produce a single crease on up to 5,000 letter size sheets an hour when operated in high speed crease only mode. Business card production is quick and efficient; a run of 250 business cards can be finished in less than two minutes, ready to  pack and ship.

The AutoCut Pro is equipped with an upper-belt tri-suction feeding mechanism which can take  wide range of paper stocks and sheet sizes from 8.2”(W) x 8.2”(L) to 13”(W) x 27.5”(L) along   with paper weights from 32 lb bond to 130 lb cover stock. The feed table automatically elevates to separate the printed sheets to alleviate mis-feeding, along with any damage or roller-marks occurring on the finished products.

The AutoCut also has a double-feed detection sensor to avoid wasting valuable prints. In addition, it’s cut-mark sensor reads any image drift and will register to ensure a consistent finish on every sheet. There is also an adjustment to allow for printed sheets that are skewed.

Features

• Slit, cut and crease in one pass
• High speed crease only mode: single crease up to 5,000 letter size sheets an hour
• 4" Touch Screen control with pre-set and customized job memory
• Upper belt tri-suction feed system with 4” pile height
• Paper thickness from 32 lb. bond to 130 lb. cover stock (120-352 GSM)
• Max sheet size 13" x 19" (up to 13 x 27.5" with optional long sheet kit)
• Minimum sheet size 8.2” x 8.2”
• Minimum finished work size 3.3” x 1.9”
• Registration mark reader
• Skew adjustment, side aligner, Double feed detection