This hand-fed creaser can produce up to 2,800* sheets per hour, program up to 30 jobs with up
to 6 creases per sheet. Cross perforate when not creasing, optional rotary perforating is available.
The PT 331S is an entry level tabletop manual feed creaser that produces the same professional results of more expensive creasers at a fraction of the cost. This Semi-Automatic creaser is also capable of perforating both directions in a single pass. Equipped with interchangeable creasing/perfing dies, the PT 331S can quickly switch over from perfing to creasing while preventing digital toner cracking. The 331S can be placed on an optional stand or used as a tabletop machine with removable trays to minimize the footprint.
Specifications
Electrical
|
110-130V, 50/60Hz, 15A
|
Speed
|
2,800 sheets per hour
|
Maximum Sheet Size
|
13″ wide x 25.6″ long (33.02cm x 65.02cm)
|
Minimum Sheet Size
|
1.97″ wide x 3.94″ long (5cm x 10.01cm)
|
Stock Weight
|
100-350 gsm
|
Tabletop/Floor
|
Tabletop
|
Max Number of Creasing Positions
|
6
|
Program Memory
|
30
|
Feeder
|
Manual
|
Cross Perforating
|
Yes
|
Linear Perforating
|
Yes
|
Strike Perforating
|
No
|
Micro Perforating
|
No
|
Auto Sheet Measure
|
No
|
Controls
|
Touch Pad
|
Warranty
|
1 Year
|
Machine Stand
|
Optional
|
Rotary Perf Options
|
12 TPI and 24 TPI (up to 4 rotary perf assemblies can be fitted)
|
* based on 8.5” x 11” run landscape, 1 crease (speed is also operator dependent)
NOTE: Machine performance will vary based on stock weight, type, and specifications of the job being performed.