Fully Automatic Laminator for Digital Color Output
Eliminate time-consuming, costly hand feeding and trimming in laminating with the new value priced ALM3230 lamination system!
The ALM3230 Automatic Laminator will not only save you significant labor cost but it will also free your staff to perform other task. Additionally you will be able to deliver your lamination jobs sooner. The ALM3230 can handle from 20 lb. bond up to 100 lb. cover stock. You can load up to 100 sheets in the feed tray. The fixed speed of 40" per minute can produce 200 letter size sheets per hour or 100 12" x 18" sheets per hour.
The lower cost ALM3230 was designed for shops that may not require the faster speed or added versatility of the ALM3222. The comparison chart below can help you decide which model is the best match for your shop.
ASAP Digital Laminating Film Produces Quality Results
The exclusive ASAP films are designed to bond to the hard to adhere to toner based digital prints. On Demand Digital Printing utilizes toner based print engines which contain fuser oils and glycol. These additives create a surface which conventional copolymer films have a difficult time sticking to. ASAP adhesive is a specialized adhesive layer designed to bond to these difficult toner surfaces. ASAP stands for Always Sticks, All Prints meaning this film can be used for any printed sheet whether it is a difficult toner surface or conventional offset printing. ASAP Roll Film is available in gloss or matte finish in 1.5mil: 12.6" x 984', 3mil: 12.6" x 492' and 5mil: 12.6" x 328'. Single side lamination is possible utlilizing the nylon film which is available in gloss or matte finish in 1.2mil: 12.6" x 948'. The 1.2mil nylon film is ideal for occassional short-run single side lamination of book covers.
Key Features:
- Small Foot Print – less than 4 sq. ft.
- Table Top or optional stand with locking roller casters
- 115 Volt, 15 amp service with economy mode
- Ultra quick warm up of less than 5 minutes
- Virtually Unattended Operation
- Digital Sheets sizes: 13”x19”, 12”x18”, 11”x17”, 8.5”x11”
- Laminates up to 100lb cover stock
- Automatic two side lamination or short one side work
- Adjustable Automatic Flush or Sealed edge trim
- 1 year parts and labor warranty